User Manual

Table Of Contents
To create a filter:
1 From the Options menu, choose Create/Edit Filters.
2 Click the New button to create a new filter and name the new filter in the dialog box.
3 Enable a checkbox next to the entire category or the individual tools in each category
to determine the tools included in the filter.
Enable each tool you want to keep in the Spline Editor when the filter is selected.
The Invert All and Set/Reset All buttons can apply global changes to all the checkboxes,
toggling the selected states as described.
To switch the selection state of the categories when creating a filter list:
1 Click the Invert All button.
2 After configuring the custom filter, click the Save button to close the Settings dialog
and save the filter.
To enable all checkboxes or disable all checkboxes:
1 Click the Set/Reset All button as many times as needed until all categories are either
checked or unchecked.
2 After configuring the custom filter, click the Save button to close the Settings dialog
and save the filter.
To apply a filter to the Spline Editor:
Choose the desired filter by name from the Options menu. The filter applies to both the
Spline Editor and the Timeline.
Each filter you create is listed in the Options menu.
Chapter – 61 Animating in Fusion’s Spline Editor 1232