User Manual

4 (Optional) If you want to change the image that’s displayed on that side of the split, you
can drag new nodes onto either half of the viewer.
5 To turn off the wipe, click the Switch to Split Wipe View button again (or press /).
The wipe divider can be adjusted for comparing different areas of the A and B images.
Even when you wipe, you can choose different display channels, view LUTs, or other display
options for each buffer individually by clicking on the half of the wipe you want to alter, and then
choosing the options you want that buffer to use. This allows easy comparison of different
channels, LUTs, or other viewer settings while wiping the same image, or different images.
Moving the Wipe Divider
Occasionally, you will have either zoomed in or panned so far from the viewer divider that it’s no
longer visible in the viewer. Holding down Command-Option and clicking anywhere in the
image will cause the viewer divider to jump to the current position of the pointer.
Subviews
A subview is a “mini” viewer that appears within the main viewer. A subview is usually used to
show different information about the image.
The Subview menu with the Histogram subview displayed.
Chapter – 58 Using Viewers 1140