User Manual

Table Of Contents
Adding a Defocus effect first, then the TV node second.
As you can see above, connecting the Defocus node first, followed by the TV node, means that
while the initial image is softened, the TV effect is sharp. However, if you reverse the order of
these two nodes, then the TV effect distorts the image, but the Defocus node now blurs the
overall result, so that the TV effect is just as soft as the image it’s applied to. The explicit order
of operations you apply makes a big difference.
Adding a TV effect first, and a Defocus second.
Chapter – 56 Working in the Node Editor 1083