User Manual
Table Of Contents
- Getting Started
- Using Web Presenter HD’s Front Panel
- Using the Monitor Output
- Using Web Presenter Setup
- Network Settings
- Setting Internet Sharing for Direct Streaming
- Streaming Using Your Smartphone
- Using Blackmagic Web Presenter HD as a Webcam
- Creating Video Links with ATEM Streaming Bridge
- Teranex Mini Rack Shelf
- Updating the Internal Software
- Developer Information
- Help
- Regulatory Notices
- Safety Information
- Warranty
9 10
To connect Open Broadcaster’s broadcast
link to YouTube, click ‘start streaming’
in the bottom right corner of the screen.
This establishes the link to YouTube from
Open Broadcaster and from here everything
will now be set using YouTube Live.
Go back to YouTube Live and you will
see the webcam program output from your
Web Presenter HD in the background.
Click ‘done’.
11 12
With Open Broadcaster now communicating
with YouTube Live, you are ready to begin your
broadcast. Now it’s time to perform your final
checks and make sure everything is good.
If you are all set, you can now begin your
broadcast by clicking ‘go live’.
You are now broadcasting live on YouTube with Open Broadcaster.
NOTE Due to the nature of internet streaming there can often be a delay, so it’s
important to watch the stream on YouTube and confirm your program has finished
before clicking ‘end stream’ to make sure you don’t accidentally cut the end of your
broadcast short.
20Using Blackmagic Web Presenter HD as a Webcam