User Manual
Table Of Contents
- Getting Started
- Using Web Presenter HD’s Front Panel
- Using the Monitor Output
- Using Web Presenter Setup
- Network Settings
- Setting Internet Sharing for Direct Streaming
- Streaming Using Your Smartphone
- Using Blackmagic Web Presenter HD as a Webcam
- Creating Video Links with ATEM Streaming Bridge
- Teranex Mini Rack Shelf
- Updating the Internal Software
- Developer Information
- Help
- Regulatory Notices
- Safety Information
- Warranty
Off and On Air buttons
You can start or stop a live stream by using the ‘off’ and ‘on air’ buttons. The ‘on air’ button
illuminates red when a live stream is in progress.
Setup Tab
Name
If you want to rename your Web Presenter HD, type a new name into the box and click ‘save’.
Language
Lets you change the unit’s language setting.
Software
Displays Web Presenter HD’s current software version.
Audio Meters
Use the menu to choose the type of audio meter to display. Choose from VU -18dBFS,
VU-20dBFS, PPM -18dBFS or PPM -20dBFS reference levels.
Network
These settings allow you to configure options such as choosing between connecting to a
network over DHCP or using a static IP address. For more information on connecting your
WebPresenter HD to a network, refer to the ‘network settings’ section.
Connection Priority - When Ethernet and a mobile phone are both connected to
theWeb Presenter, this setting lets you choose which connection will be used for
streaming. For more information on mobile tethering, refer to the ‘streaming using
yoursmartphone’ section
16Using Web Presenter Setup