User Manual

ManualsBrandsBlackloud ManualsElectronicsSOUNDOT

Quick Guide - 2 Quick Guide - 3 Quick Guide - 4 Quick Guide - 5

Quick Guide - 6

Quick Guide

Package Contents Your SOUNDOT

Earbuds

Charging Your Earbuds

SOUNDOT Earbuds

(with Microphone and

Control Module)

Earbud Stabilizers

(2 pairs in Medium

and Large)

Carrying Pouch

Charging Cable

(Micro-USB)

Quick Guide and Safety

Document

Earbud Cushions

(3 pairs in Small, Medium,

and Large)

1 Earbud Cushions

2 Volume Down Button

3 Volume Up Button

4 Microphone

5 Power/Function Button

6 Status Indicator LED

7 Charging Port

(Micro-USB)

Although your SOUNDOT

earbuds come with

a partially charged

battery, it is

recommended

that you fully

charge your earbuds

before first use. To charge

your SOUNDOT earbuds:

1 Open the charging port cover on the right earbud.

2 Connect the charging cable to the right earbud and either a PC or a

dedicated USB charger.

3 Once your SOUNDOT earbuds start charging the status indicator

LED will light up a solid red color. When your SOUNDOT earbuds

are fully charged the status indicator will turn a solid blue color.

NOTE: On average your SOUNDOT earbuds takes about 2.5 hours for a full

charge when connected to a PC, and about 1 hour when connected to a

dedicated charger.

Attachable Clip

Quick Guide

Left Right

Controller

3 4 5

Pairing Your SOUNDOT

Earbuds

Before you start using your SOUNDOT earbuds,

you must first pair it with the Bluetooth®-

enabled device you want to connect it to

(such as a smartphone, PC, or digital music

player).

To pair your SOUNDOT earbuds with a device:

1 Enable Bluetooth on the device you want to pair your SOUNDOT

earbuds to.

NOTE: Consult your device’s user manual for instructions on enabling Bluetooth.

2 Press and hold the power/function button on your SOUNDOT

earbuds for about 8 seconds until the status indicator LED flashes

blue/red alternately and you hear the “Pairing” voice prompt from

your earbuds. Your SOUNDOT earbuds are now in pairing mode.

NOTE: If left inactive in pairing mode your SOUNDOT earbuds will automatically

power off after 3 minutes.

NOTE2: You must enter pairing mode from a powered-off state. Pressing and

holding the power/function button for more than 4 seconds from a powered-on

state will turn the earbuds off.

Summary of content (2 pages)

PAGE 1
Package Contents Your SOUNDOT Earbuds Left Charging Cable (Micro-USB) Earbud Stabilizers (2 pairs in Medium and Large) 7 6 1 Earbud Cushions (3 pairs in Small, Medium, and Large) Quick Guide - 2 Attachable Clip Quick Guide and Safety Document Quick Guide - 3 Controller 2 Quick Guide SOUNDOT Earbuds (with Microphone and Control Module) Right Carrying Pouch Quick Guide Pairing Your SOUNDOT Earbuds Charging Your Earbuds 3 4 5 1 Earbud Cushions 5 Power/Function Button 2 Volume Down Button
PAGE 2
3 4 Search for your SOUNDOT earbuds (“SOUNDOT v1.0”*) in the device’s list of available connections. Once you have found your SOUNDOT earbuds in the list of available connections select them and accept any confirmation messages. Listening to Music * The name for your SOUNDOT earbuds in the list of available connections may vary depending on the model purchased. When you are listening to music you can control playback through the controller on your SOUNDOT earbuds.