Instruction Sheet

ASSEMBLY & INSTALLATION INSTRUCTIONS for FRS-11F-SN

CAUTION: READ ALL INSTRUCTIONS CAREFULLY FOR SAFE OPERATION AND INSTALLATION.

CAUTION

Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible

shock.

GENERAL

1. All electrical connections must be in accordance with local and national electrical code (N.E.C)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician. Remove the fixture and the mounting package from the box and make sure

that no parts are missing by referencing the illustrations on the installation instruction.

2. Dimming controller type: TRIAC phase control dimmer.

3. Recommended TRIAC dimmers:

LUTRON: ARIADNI AYCL-153P, DIVA DVCL-153P, SKYLARK CTCL-153P, SKYLARK SCL-153P;

LEVITON: ILLUMATECH IPI06-1L, ILLUMATECH IPI10-1L, DECORA DSL06, DECORA DSM10;

LEGRAND: ADORNE: WHISPER/ ADWR, SOFTTAP/ ADTP, TOUCH/ ADTH.

ASSEMBLY AND INSTALLATION

1. Take the fixture out of the box.

2. Remove the glass / decorative plate asembly（14 / 13) from the fixture pan（12）by loosening two

thumbscrews（15）.

3. Remove the back panel (10) from the fixture pan (12) by loosening screw(11).

4. Pull the supply wires (2&8) and the house ground wire (5) out of the outlet box (1) and thread

through large center hole in back panel (10)

5. Place the back panel（10）over the outlet box (1). Insert mounting screws (9) through the slots in

the back panel and then tightly secure the mounting screws into the outlet box.

6. Make the wiring connections: connect the white supply wire (2) to the white fixture wire (4);

connect the black supply wire (8) to the black fixture wire (7); connect the house ground wire (5) to the

fixture ground wire (6) using wire connectors (3).

7. Align the two holes on the back panel (10) . Secure the fixture pan (12) to the back panel(10) by

tightening screw(11); Please see fig.2.

8. Assemble glass / decorative plate assembly (14/ 13)to fixture pan (12) by joining parts together and

tightening two thumbscrews (15)

PAGE 1
ASSEMBLY & INSTALLATION INSTRUCTIONS for FRS-11F-SN CAUTION: READ ALL INSTRUCTIONS CAREFULLY FOR SAFE OPERATION AND INSTALLATION. CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock. GENERAL 1. All electrical connections must be in accordance with local and national electrical code (N.E.C) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
PAGE 2
INSTALLATION IS NOW COMPLETED (1) (5) (8) (6) (7) (2) (3) (4) 1. OUTLET BOX (10) 2.WHITE SUPPLY WIRE (9) 3.WIRE CONNECTORS (11) 4.WHITE FIXTURE WIRE 5.HOUSE GROUND WIRE (12) 6.FIXTURE GROUND WIRE 7.BLACK FIXTURE WIRE 8.BLACK SUPPLY WIRE 9.MOUNTING SCREWS (15) 10.BACK PANEL 11.SCREWS (13) 12.FIXTURE PAN 13.DECORATIVE PLATE (14) 14.GLASS 15.THUMBSCREWS Fig.2 BLACKJACK LIGHTING 1547 Barclay Blvd. Buffalo Grove, IL 60089 blackjacklighting.