Installation Sheet

ASSEMBLY & INSTALLATION INSTRUCTIONS FOR EQS-28V-PC, EQS-39V-PC

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible

shock.

GENERAL

1. All electrical connections must be in accordance with local and national electrical code (N.E.C)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician. Remove the fixture and the mounting package from the box and make sure

that no parts are missing by referencing the illustrations on the installation instruction.

2. Dimming type: 0-10V control dimmer.

3. This is fixture has a 100V -277V Dimming driver Installed

ASSEMBLY AND INSTALLATION

1. Take the fixture out of the box.

2. Remove the acrylic lens / decorative plate asembly（16 / 15) from the fixture pan（12）by

loosening four rear thumb nuts（14). Retain the thumb nuts.

3. Remove the back panel (10) from the fixture pan (12) by loosening four screws (11)

4. Pull the supply wires (2&8) and the house ground wire (5) out of the outlet box (1) and install cross

bar (18) to the outlet box (1) by using two mounting screws (9).

5. Place the back panel（10）over the cross bar (18) through the two outward screws (17) and

secure it by tightening two hex nuts (13).

6. Make the wiring connections: connect the white supply wire (2) to the white fixture wire (4);

connect the black supply wire (8) to the black fixture wire (7); connect the house ground wire (5) to the

fixture ground wire (6) using wire connectors (3).

7. If present, connect low voltage dimming control wires from a compatible 0-10V wall dimmer to the

Purple and Grey wires coming from the driver.

8. Align the four holes on the fixture pan (12) with four screws (11) and securely tighten the fixture pan

(12) to the back panel (10)

9. Assemble acrylic lens / decorative plate assembly (16 / 15), to fixture pan (12) by joining parts

together and tightening four rear thumb nuts (14)

PAGE 1
ASSEMBLY & INSTALLATION INSTRUCTIONS FOR EQS-28V-PC, EQS-39V-PC Please read carefully and save these instructions, as you may need them at a later date. CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock. GENERAL 1. All electrical connections must be in accordance with local and national electrical code (N.E.C) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
PAGE 2
INSTALLATION IS NOW COMPLETED (17) (1) (2) (3) (13) (10) (7) (6) (8) (12) (5) (9) (14) (4) (18) (11) (15) (16) BLACKJACK LIGHTING 1553 Barclay Blvd. Buffalo Grove, IL 60089 blackjacklighting.