Installation Sheet

BJL 150801

ASSEMBLY INSTRUCTIONS for EG2-24T-BL, EG2-24T-SN

CAUTION: READ ALL INSTRUCTIONS CAREFULLY FOR SAFE OPERATION AND INSTALLATION

CAUTION

THIS TABLE LAMP IS PROVIDED WITH A 2-PIN PLUG. THIS PLUG WILL FIT IN A 2- or 3-PIN OUTLET.

WARNING---THIS IS AN ELECTRIC LAMP---NOT A TOY! TO AVOID RISK OF FIRE, BURNS, PERSONAL

INJURY AND ELECTRIC SHOCK, IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL

CHIDREN CAN REACH IT.

CAUTION--RISK OF ELECTRICAL SHOCK OR FIRE, USE ONLY ON 15 AMP MAXIMUM BRANCH CIRCUIT.

REDUCE THE RISK OF FIRE---USE ONLY 8W LED LIGHT SOURCE AS SUPPLIED, 120-240 VOLT 50/60Hz.

INSTRUCTIONS

Take the fixture body and lamp base out of the box.

Fixture body

Base

_________________________________________________________________________________

Lamp arm

Switch

Housing

Base

LED Driver

Adjustable

(provided with nonpolarized parallel

blades for connection to line voltage.)

Head assembly

Adjustable

Y connector

USB interface

1- Insert the task lamp into the hole of the base

2- Plug into suitable 2-pin electrical outlet

3- The task lamp is provided with a 3-way switch: High-Low-Off

4- Gently grasp the arm or the head and adjust to desired angle.

BLACKJACK LIGHTING 1553 Barclay Blvd., Buffalo Grove, IL 60089 - blackjacklighting.com Tel:

847-941-0588

PAGE 1
ASSEMBLY INSTRUCTIONS for EG2-24T-BL, EG2-24T-SN CAUTION: READ ALL INSTRUCTIONS CAREFULLY FOR SAFE OPERATION AND INSTALLATION CAUTION THIS TABLE LAMP IS PROVIDED WITH A 2-PIN PLUG. THIS PLUG WILL FIT IN A 2- or 3-PIN OUTLET. WARNING---THIS IS AN ELECTRIC LAMP---NOT A TOY! TO AVOID RISK OF FIRE, BURNS, PERSONAL INJURY AND ELECTRIC SHOCK, IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL CHIDREN CAN REACH IT. CAUTION--RISK OF ELECTRICAL SHOCK OR FIRE, USE ONLY ON 15 AMP MAXIMUM BRANCH CIRCUIT.