Instruction Manual

2. FIT AND ADJUSTMENT INSTRUCTIONS

WARNING!: Do not attempt to place a loaded firearm into your SERPA

holster without carefully

followingtheseinstructionswithanUNLOADEDfirearm.

2.1 Proper Firearm and Holster Pairing

Beforeyoubegin,lookatthebackoftheholsterbodyandconfirmthatyouhavetherightsizeandmodel

holster designed to fit your firearm. This holster is only compatible with the firearms listed on the back of the

holster.Ifindoubt,contactusat1-800-694-5263orcs@blackhawk.com.

WARNING!: Do not use this holster with an incompatible, improperly maintained or abused firearm.

Failingtofollowthisprecautioncouldcauseanunintendeddischargeand/ordefeatretentionproperties

andresultinpropertydamageand/orseriousinjuryordeath.

2.2 Level 1 “Passive Retention” Adjustment

The first level of retention on your SERPA

holsterisaresultoffrictionfromtheholsterbodyonthefirearm’s

triggerguard(forLevel2and3DutyHolsters)oragainstthefirearm’sframeandlight(forLightBearing

Holsters).ThisfrictioniscreatedbythedetentthatholdsthetriggerguardontheLevel3DutyHolsterandis

moreactivethanthefrictionontheLevel3LightBearingHolster.Retentioncanbeadjustedbytighteningor

loosening the passive retention screw as follows: