Instruction Manual

1. Remove belt loop mounting screws completely.

2. Spread the two straps of the belt loop open and slide over the duty belt at the desired location.

3. Push all the way down until the top of the duty belt is seated firmly against the inside radius of the loop.

4.Hand-tightenscrewsevenlyandfirmly.DONOTOVERTIGHTEN.Ifusingatorquescrewdriver,tightenusing

asettingof12inch-lbs.

5. Push and pull on the holster to make sure it does not move on the duty belt.

WARNING!: Ensurethatnothingonyourdutybelt,holsterorclothing(e.g.drawstrings)interfereswith

the safe holstering and drawing of your firearm and functioning of your holster.

3.4 Mounting Your Tactical Holster Platform to a Belt

UseyourSERPA

holsteronlywithadurableandwell-maintainedbeltspecificallydesignedfortacticalorduty

use. To mount your tactical holster platform to a belt, follow these steps:

1. AttachplatformtobeltusingVELCRO

belt keepers. Spread the two straps apart along your waist to help

with stability.