Instruction Manual

NOTE: Do not tighten mounting screws with a power tool or otherwise apply excessive force. Doing so can

damage your holster.

•Routinelycheckmountingscrewsforlooseningandtightenifnecessary

WARNING!:Donotuseholsterifamountingscrewismissing.Usingwithlessthanallthreescrewscan

weakentheholster’sretentionproperties.ContactBLACKHAWK!

for replacement mounting screws.

•Tocompensateforbulkybodyarmororvariedhip-to-waistcontours,BLACKHAWK!

’sholsterspacerkit

allows you to adjust the amount of angle and distance away from your body.

NOTE: Do not use longer spacer kit mounting screws without the spacer. Doing so can damage your holster.

3.3 Mounting Your Jacket Slot Belt Loop to a Duty Belt

UseyourSERPA

holsteronlywithadurableandwell-maintainedbeltspecificallydesignedfordutyuse.The

jacketslotbeltloopcanaccommodatedutybeltsupto2¼”wide.Tomountyourjacketslotbeltlooptoaduty

belt, follow these steps:

Spacer Kit Mounting Screw

(Shown actual size)

Standard Mounting Screw

(Shown actual size)