Selection Guide

ManualsBrandsBlackburn ManualsCrimp Tools & AccessoriesDieless Adjustable Crimper

E6 BLACKBURN/COLOR-KEYED/HOMAC TOOLS, DIES AND KITS

—

Manual compression tools

TBM45S crimp tool

• Wide range of #8 to #2 for copper lugs and

#10 to #6 for aluminum lugs

• Each die has die code embossing

• Shure Stake mechanism ensures a properly

completed crimp each time

• Colour-coded die wheel rotates into position



• Also installs up to green colour-coded C-Taps

and MD2 series motor disconnects

• 

Creates diamond-style crimp

Cat no. Description Pkg. qty.

  

Conductor size

#10

Red

Blue

Grey

Brown

Green

Copper connectors

One hole, short

     



   



   



   



   



Splice, short



   



One hole, long



   



Two hole, long



   



Splice, long



   





 

  



Narrow tongue

 

  



C-taps



    

Motor disconnects



    

Aluminum connectors

One hole 





















  

Splices   

  

Bi-pins



 

  

Equipment lugs



 

  

—

Crimp-Assist

™

foot provides stability

when work suface leverage is needed

to crimp larger connectors.

Summary of content (6 pages)

PAGE 1
E6 B L A C K B U R N/C O L O R - K E Y E D/ H O M A C TO O L S , D I E S A N D K I T S — Manual compression tools TBM45S crimp tool • Wide range of #8 to #2 for copper lugs and #10 to #6 for aluminum lugs • Each die has die code embossing • Shure Stake mechanism ensures a properly completed crimp each time • Colour-coded die wheel rotates into position for proper die nest adjustment • Also installs up to green colour-coded C-Taps and MD2 series motor disconnects • Requires two crimps per connector Creat
PAGE 2
B L A C K B U R N M A N U A L C O M P R E S S I O N TO O L S E7 — Manual compression tools TBM4S dieless crimp tool • Wide range of #8 to 250 kcmil for copper lugs and #8 to 4/0 for aluminum lugs • Adjustable indenter eliminates the need to buy and maintain numerous individual dies • Shure Stake mechanism ensures a properly completed crimp each time • Easily adjusted by turning knurled adjusting wheel and aligning pointer with proper terminal size • Dieless adjustable crimper for Color-Keyed compression
PAGE 3
E8 B L A C K B U R N/C O L O R - K E Y E D/ H O M A C TO O L S , D I E S A N D K I T S — Manual compression tools TBM6 and TBM6S* crimp tools • Wide range of #8 thru 500 kcmil for copper lugs, splices and taps and #10 thru 350 kcmil for aluminum lugs and splices • Also install 63105 through 63140 orange, green and blue H-Taps • Shure Stake mechanism ensures a properly completed crimp each time (only in TBM6S) • Complete with plastic carrying case and wire brush • No dies included Creates diamond-style c
PAGE 4
B L A C K B U R N M A N U A L C O M P R E S S I O N TO O L S E9 — Manual compression tools TBM8 and TBM8S* crimp tools • Install coded copper lugs and connectors #8 through 500 kcmil • Install aluminum lugs and connectors #10 through 350 kcmil • Shure Stake mechanism ensures positive compression (only in TBM8S) • Included dies are colour-coded and provide die-code embossing for easy installation and inspection • Install all coded copper compression joints and a selection of small C-Taps • Complete with i
PAGE 5
E10 B L A C K B U R N/C O L O R - K E Y E D/ H O M A C TO O L S , D I E S A N D K I T S — Manual compression tools OD series manual compression tool • Integral self-gauging system in tool head assures proper adjustment before each crimp • Improved design reduces force to crimp by as much as 20% • Teflon® over bronze bearings greatly reduces wear at linkage and pins; far superior to steel bearing surfaces • All standard insert dies available for OD58 tool (“O” and “D”, 840, etc.), 5/8 in.
PAGE 6
B L A C K B U R N M A N U A L C O M P R E S S I O N TO O L S E11 — Manual compression tools UT 3 M installation tool Nothing to lose – a built-in 5⁄8 in. die is precisioncast and installs compression connectors from #8 to 4/0 AWG. • One stroke of the tool develops full compression • Ensures proper compression before jaws will release • Only 2.2 lb Cat no.