User manual

PROGRAM TIME OF DAY PROGRAM TIME OF DAY
ENGLISH
ENGLISH
39
STEP BY STEP—SETTING THE TIME OF DAY
1. Starting in the Time of Day display in the Lower Data Window if Time of Day is Active; or
Starting in the Average or Maximum Speed displays if Time of Day is Inactive.
2. PRESS & HOLD the MODE key for approximately 2-seconds.
3. VIEW will appear in the Lower Data Window with ON or OFF in the Center Display Line.
4. Select ON or OFF using QUICK PRESSES of the OPTION key. QUICK PRESS the MODE key
to enter the value and advance to 12/24 Hour setting.
a. Select ON if you wish Time of Day to be part of the display sequence in the Lower
Display Window.
b. Select OFF if you do not wish to view Time of Day on the display.
5. Repeat steps 3 and 4 to Set Hours and Minutes and QUICK PRESS the MODE key to exit
the Time of Day programming sequence.
NOTE: Before you can program any computer settings, the primary chronograph must be cleared
to zero using a 2-second
PRESS & HOLD of the S/S key while in the Ride Distance (DST)
screen.
STEP BY STEP—SETTING THE TIME OF DAY
STEP 3 & 4
STEP 5
40
CYCLE COMPUTER
STEP 1 & 2
STEP 4
Blackburn_2/3_Manual 8/3/05 10:00 AM Page 42