User manual

PROGRAM ODOMETERS PROGRAM TIME OF DAY

ENGLISH

1. Starting in ANY Odometer screen (Odo 1, Odo 2 or Odo 1/2 ) in either

Bike 1 or Bike 2.

2. PRESS & HOLD the MODE key for approximately 2-seconds.

3. ODO 1 will appear in the Lower Data Window with "00,000" in the

Center Display Line.

4. Adjust the Odometer 1 setting using QUICK PRESSES of the OPTION

and START/STOP keys. Fast advance using a PRESS & HOLD.

5. When Odo 1 is set to the desired value, QUICK PRESS the MODE key to

enter the value and Advance to setting Odo 2.

6. Repeat steps 3 and 4.

7. QUICK PRESS the MODE key to enter the Odo 2 value and exit the

setting sequence.

STEP BY STEP—SETTING THE PROGRAMMABLE ODOMETERS

STEP 3 & 4

STEP 5 & 7

Blackburn Delphi Computers are equipped with a clock which shows time of day in either 12 or

24 hour formats. There is also a programming option which allows you to turn the clock off so it

does not show up in the normal operation sequence, reducing the number of key strokes needed

to move through the displays.

CYCLE COMPUTER

Blackburn_2/3_Manual 8/3/05 10:00 AM Page 40