Selection Guide
17
E-Z-GROUND GROUNDING CONNECTORS
Provides a permanent, reliable connection.
• Crimps to cable
• Clamps to ground rod and rebar
• Uses standard Blackburn
®
featuring the
®
System hand and hydraulic tools
• Color coded for easy installation die selection
• Made from high-conductivity wrought copper
• Furnished with stainless steel hardware,
1
4"
washers, bolts and nuts
• UL
®
467 – Approved for direct burial
Cat. no. Wire size (AWG)
Ground rod
diameter (in.) Rebar # (in.) Bolt size (in.) Die code
or
33 Brown
or
37 Green
42 Pink
45 Black
or
54 Purple
Terminate or connect continuous
runs of copper cable to flat surfaces.
• Captivated “keeper bar” design extends cable
range and helps hold cable prior to crimping,
facilitating installation
• Saddles marked with conductor size and die code
• Conductor can be assembled to saddle
with standard dies and hydraulic tools
• Made from high-conductivity cast copper
Cat. no. Wire range
Bolt hole
(in.)
Die code
no.*
Unit
qty.
Std.
pkg.
Wt. per
100
Hex die Dimensions (in.)
Cat. no. Die code no. L1 L2 D C H
* TM14M, 13100A, TBM15I with hex crimp dies.
** TBM15I with hex crimp dies only.
C
H
G
Bolt size
D
H
C
D
G
Bolt size
—
E-Z-Ground
™
grounding connectors
Ground clamps
—
Ground clamp
—
Flat-surface ground clamp
Diagram
DB
DB