User manual

29
Other Information
Installing the BlackVue Software
1.
Insert the micro SD card(accessory)
into the PC. ( See page 16)
2.
Double-click the ‘BlackVueSetup(HD)_E.
exe’ file on the Micro SD card.
3.
Follow the directions presented by
the Setup program until you finish
the installation.
4.
Check that a shortcut to the
BlackVue Software is created on the
Windows Desktop.
N
Double-click the shortcut to the
BlackVue Software to run the
program.
]
If the version of the firmware is higher than that of the software,
the recording file will not be played
• Check the versions of the software and the
firmware.
• If the version of the software is lower, install
the software newly.