User manual

10
Using the BlackVue
Installing the BlackVue
5.
Tie the power cable.
N
Use the provided cable holder, if
necessary.
6.
Adjust the position of the camera
lens of the BlackVue.
N
The BLACKVUE logo should be
slightly further down than horizontal.
N
Check the data saved during a test
drive. Adjust the lens position, if
necessary.
N
If you connect a mobile video device
(smart phone/navigation), you can
adjust the angle of the lens viewing
the video. (

See page 11.)
7.
Start the engine. Check whether the
BlackVue is installed correctly.
N
When the BlackVue is installed
correctly, its LED will turn on.
d