Specifications

724-746-5500 | blackbox.com 74

iCOMPEL Digital Signage - User Guide (V8.1.1)

If touch is enabled for a Zone that is displaying an HTML page, touch events are passed to the HTML player for handling.

This can allow a user to navigate Web pages using links embedded in the displayed HTML page.

4.2.4.1 Layout

From the menu bar, select Layouts, and the Layout you want to configure, then select the Interaction tab.

On the Interaction tab, you can select the action in response to a touch screen event.

The settings may include:

Whether a touch response is required for this Layout at the Layout level or not

Whether the touch response is Change Layout command or an Advance to command, and the Layout changed to, or the

Zones receiving the Advance to command

Whether it is the touch or release operation that causes the action

If using a Layout Change, which other Layout to move to

The time after which this Layout will revert to another Layout in the absence of a touch event.

4.2.4.2 Zone

To configure touch actions for a Zone, you must either:

Include an On Touch Advance to command in the Playlist of the appropriate Zone.

Include an On Touch Change Layout command in the Playlist of the appropriate Zone.

Play an HTML page in the Zone.

To configure these items, use the Specials Tab of the Playlist editor for the appropriate Zone to add the appropriate Playlist

items.

You can include more than one On Touch Advance to or On Touch Change Layout command in the Playlist of the

appropriate Zone. Each On Touch command overrides the previous one. This allows the reaction to a touch event to change

throughout the Zone's Media Playlist.

If the Zone is displaying an HTML page, it is normal not to have the Zone reactive to touch events since the On Touch event

will take precedence over the HTML player. Only Left Mouse Button Up and Down events are passed to the HTML player.

To use HTML navigation, either omit any On Touch Playlist items or use the Interact Clear (Special Tab in the Playlist

editor) to de-activate any previous On Touch items.

4.2.5 Click on touch

You can determine whether there is audio feedback when a Touch Screen is clicked (pressed).

To play an audio file, then enable Click on Touch and specify the Audio file to play. No sound is played when the setting

is No Click on Touch.

Volume

Volume is expressed as a percentage of the Master Volume level. The Master Volume Level is specified on the Audio page

in the Setup menu.

If this entry is blank, then 75% of the Master Volume level is used.

Audio File Selection

The File & Folders section lists all Audio files in the currently selected folder and provides access to folder (directory)

navigation.

To change the current folder, click on a folder name.

To play a specified Audio file, ensure the Use Sound radio button is selected next to the required Audio file.