Specifications

724-746-5500 | blackbox.com 63

Understanding Media Types

1. Select the Playlist where you want to add the Rendezvous Point.

2. Click the Specials tab.

3. Type in a name for the Rendezvous Point in the text box. You can enter any text for the name, except for a name

beginning auto_.

4. Click Add.

5. In the Playlist, make sure the Rendezvous Point appears at the correct position (immediately before the item you want

to be launched by the Advance To command).

6. If necessary, repeat these steps to create additional Rendezvous Points in other Playlists.

Adding an Advance To Command

To add an Advance to command to a Playlist, follow these steps:

1. Select the Playlist where you want to add the.

2. Click the Specials tab

3. Select the Rendezvous Point by name from the list in the Advance To Rendezvous Point section.

4. Click Add

5. In the Playlist, make sure the Advance to command appears at the correct position (immediately before the item that

you want to synchronize).

Advance To Properties

All Zones

Specifies which Zones the Advance To will be sent to.

3.5.2 Change Layout command

Unlike the Advance to command, the Change Layout command launches a different screen Layout, which may have a

noticeably different arrangement of Zones. If you want to implement a simple change of the Layout, then using an Advance

to command would bring a quick result. However, it is difficult to affect a complex change using the Advance to command.

Change Layout displays a different Layout entirely, but it does take longer to refresh the Screen.

The Change Layout command is available on the Specials tab for Playlists.