Specifications

724-746-5500 | blackbox.com 139

Setup

Configuration

Bits per Second

Select the Baud rate in bit per second from the drop down list. The iCOMPEL currently supports rates between 110 and

460800.

Data Bits

The number of data bits to use. Select from either 7 or 8.

Stop Bits

The number of stop bits to use. Select from either 1 or 2.

Parity

The number of stop bits to use. Select from Odd or Even.

Use Local Override

If enabled, then this will use the specified Local Override settings rather then the default Channel settings.

Note: This section is only shown if the iCOMPEL is either a Channel Subscriber or a Channel Publisher.

9.4.5 Interactivity

The iCOMPEL can programmed to respond to inputs from:

USB Touch Screens

RS-232 modem control inputs

Remote Keypad Buttons

This page allows these inputs to be enabled and configured.

NOTE Some features may depend on installed feature keys.

Touch

Status

The Status field indicates the current state of the Touch system. It can indicate that:

No Touch Screen is connected

Touch Screen is connected, but is not Calibrated

Touch Screen is available

The Touch Screen is only usable when the latter Status is displayed.

Touch Screen Calibration

Once a Touch Screen is connected, it needs to be calibrated before use.

To calibrate a screen, the follow these steps:

1. Click Perform Touch Calibration on the Web Page.

2. Move to the Touch Screen.