Specifications

724-746-5500 | blackbox.com 123

Setup

Removing a wireless network

The button next to each network name on the "Defined Networks" will delete that wireless network definition when

clicked. You will be prompted for confirmation first.

If the iCOMPEL is currently connected to that network, then the connection to it will be lost.

Connecting to a specific wireless network

The "Connect" button next to each network definition on the "Defined Networks" tab will force the iCOMPEL to attempt to

connect to that network if wireless is enabled.

Any existing wireless network connection will be stopped.

This will not be permanent - if the iCOMPEL is restarted or the wireless network connection is lost, the iCOMPEL may

connect to a different defined network.

9.3.3.4 Network Interface Order

Currently the iCOMPEL supports three network interfaces:

Wireless

3G Modem

Ethernet

This page allows the user to specify the order in which the interfaces are tried. If an interface cannot be used (e.g. Wireless

cannot find any Access Points in range) then the next preferred interface will be tried.

To set the order, use the arrow buttons to move the interface up and down in the list. The item at the top of the list is tried

first, the next one down second and so on.

9.3.3.5 Network Tests

Tests tab

The Tests tab allows you to carry out connectivity tests from your iCOMPEL to your network.

These include:

Ping test

Trace route test

DNS lookup test

121

120

119