Specifications

724-746-5500 | blackbox.com 121

Setup

Access Point Name

If your 3G network requires you to provide an Access Point Name (APN), provide it here.

3G Status tab

The 3G Status tab displays the model of the 3G modem.

The IP address and any DNS search path will be shown if the 3G Modem is connected to the 3G network.

9.3.3.3 Wireless

This tab is for managing how the iCOMPEL connects to wireless networks.

The iCOMPEL will only connect to a wireless network if;

1. Wireless is enabled.

2. The wireless network settings have been defined.

3. The wireless network is in range.

If multiple networks are defined, there is no preference as to which network the iCOMPEL will attempt to connect to.

The current state of the wireless can be seen on the "Network Status" tab, the "Defined Networks" tab will

show the state of each network next to the network name.

Tasks

Enabling or Disabling Wireless

Connecting to a Wireless Network

Change Wireless Network Details

Enabling or Disabling a Wireless Network

Removing a Wireless Network Definition

Connecting to a Specific Wireless Network

Enabling or Disabling Wireless

The tab "Enable/Disable" has a radio control for enabling or disabling the wireless interface.

Select either "Disabled" or "Enabled" then press the "Save" button to turn it on or off.

Connecting to a Wireless Network

The tab "Add New Network" is for entering details of wireless networks;

121

122

123