Specifications

724-746-5500 | blackbox.com 113

Player and System Status

If there are items that depend on Player Location Information but those PLI names are missing in a given player, an action

message is displayed along with a link to add the missing name.

The rest of the page is split into two tabs, one each for Conditional Playlist items and Conditional Schedules.

Each tab page gives the details of the PLI name on which the item depends, the operation that should be executed to

decide if the item plays, the values that the item contains and the current values in PLI.

All the required items are hyperlinked that enable directly jumping to a page of interest and changing desired values.

8.4 TV & Radio Status

For iCOMPEL's that have TV hardware, this page will be present in the status menu and will provide information about how

the TV card(s) are being used.

TV Hardware State

The first line "TV Hardware State" currently has three possible values;

Not in use

The TV hardware is not currently being used by anything in the iCOMPEL.

Rebroadcasting

The iCOMPEL is currently using the TV hardware to rebroadcast a TV or radio

station.

As well as the signal status, the current channel used to rebroadcast is displayed as

well as bandwidth information.

In use by movie player

TV hardware is in use. Either to preview/audition TV and radio media or as part of a

playing layout.

As well as the signal status, the current channel and type (i.e. TV or radio) is shown.

Signal Status

If the hardware is being used, the state of the TV/radio signal is shown as one of "Good", "Acceptable" or "Bad".

8.5 Screen Snapshot

This page displays a 'Snapshot' of main Screen display. This can be refreshed periodically as required, although very

frequent refreshing is not recommended since it may result in a temporary loss of quality in the currently playing media.

NOTE: if a video is playing then a dark blue or black rectangle will be shown in place of the video.

141