User`s manual

User Manual
Publication date: March, 2006
Revision A2
54
Fig. 3-13
Parameter description of slot 1-3:
Serial number:
The serial number is assigned by the manufacturer.
Hardware-Mechanical version:
The version of Hardware and Mechanical. The figure before the
hyphen is the version of electronic hardware; the one after the
hyphen is the version of mechanical.
Connector(for fiber module only):
Display the connector type, for instance, UTP, SC, ST, LC and so
on.
Mode(for fiber module only):
Display the fiber mode, for instance, Multi-Mode, Single-Mode.
Fiber Cable(for fiber module only):
Display the cable type, for instance, Two Wires, Single Wire.
Wavelength(for fiber module only):
Display the wavelength of the light transmitted in the fiber, for
instance, 850nm, 1310nm.
Distance(for fiber module only):
Display the maximum distance the port supported, for instance,
100m, 10km, 20km and so on.
Speed(for fiber module only):
Display the maximum speed of the port, for instance, “1G”, “100M”.