Instructions

8
ENGLISH
(Original instructions)
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u Switch off and unplug the appliance/tool.
u Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u Regularly open the chuck and tap it to remove any dust
from the interior (when tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BCD900D1S
BCD900D1K
BCD900E2K BCD900M1K BCD900B
Input voltage V
DC
18 18 18 18
No-load speed min
-1
0 - 1800 0 - 1800 0 - 1800 0 - 1800
Impact rate min
-1
0 - 6350 0 - 6350 0 - 6350 0 - 6350
Weight kg 2.60 2.60 2.87 2.22
Max. drilling capacity
Concrete mm
18 18 18 18
Steel mm 13 13 13 13
Wood mm 25 25 25 25
Battery
BL2018 BL2518 BL4018 Not Supplied
Voltage V
DC
18 18 18
BCD900D1S
BCD900D1K
BCD900E2K BCD900M1K BCD900B
Capacity Ah 2.0 2.5 4.0
type Li-Ion Li-Ion Li-Ion
Charger
SSC-200100EU SSC-200100EU 906068** Not Supplied
Input Voltage V
AC
220 - 240 220 - 240 230
Output Voltage V
DC
8 - 20 8 - 20 18
Current A 1 1 2.0
Approx. Charge
time
min 120 150 120
Declared dual-number noise emission values in
accordance with ISO 4871
Measured A-weighted sound power level, L
WA
(ref.1pW), in
decibels = 99.5 dB(A)
Uncertainty, K
WA
in decibels = 3 dB(A)
Measured A-weighted sound emission sound pressure level at
the work station, L
pA
, in decibels = 88.5 dB(A)
Uncertainty, K
PA
in decibels = 3 dB(A)
Values determined according to noise test code given in
EN 60745- 1:2009/A11:2010, using the basic standards
EN 60745-2-6:2010.
Note: The sum of a measured noise emission value and its
associated uncertainty represents an upper boundary of the
range of values which is likely to occur in measurements.
Vibration total values (triaxial vector sum) determined
according to EN60745
The work mode
description
"Hammer drilling into
concrete"
The work mode
description
"Chiselling"
Vibration emission
value a
h
14.4 m/s
2
11.8 m/s
2
Uncertainty K 1.5 m/s
2
1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
BCD900 Rotary hammer
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact Black & Decker at the following address or refer to the
back of the manual.