User manual

- 3 -

Cable Introduction

IR Cable

Power cable

AV output cable

AV input/ Power output cable

Operation

1. Connect 12VDC power supply to #3194071.

2. Connect AV in/Power out cable to camera. #3194071 will supply 12VDC to camera.

3. Insert micro SD card to #3194071.

* DVR will detect memory card automatically.

* For storage, #3194071 will auto-format Micro SD card if the original Micro SD card format is

different. Please make sure Micro SD card has done backup before inserted to #3194071.

* If #3194071 shows “NO SD”, please turn off and check Micro SD card.

4. Once #3194071 is powered on, recording is factory preset at motion detection.

* It can be reset as continuous recording, having schedule, and alarm recording through OSD

* For panic recording, please press on the remote control.

5. Press on the remote control to get into playback menu.