Setup guide

21H.264 Network IP Camera User Manual
SECTION 3: EQUIPMENT TESTING AND SYSTEM SETUP
3.10 Setup Reection software
Reection software should be installed on a Windows PC that can connect to the NVR/hDVR across a
network. If the LAN is congured to allow access to the NVR/hDVR through the internet, the Reection
PC can be anywhere that has high-speed internet access.
Reection runs on Microsoft Windows XP Professional with SP2, Windows Vista, and Windows 7. During
the installation process, the Reection installer will also load Microsoft .NET Framework 3.5 SP1.
For more information about Reection, refer to the Reection Software User Manual or the Reection
Software Quick Start Guide
3.10.1 Install Reection
Reection is provided on the Application disk included with your NVR or hDVR hardware.
1. Insert the Application disk into a DVD drive on your computer and nd the ReectionInstaller.exe
le. Double click or Run this le to start the installation.
2. Follow the screen prompts to install Reection on your computer. After you click Finish, the SC icon
(see below) will appear on the desktop and in your Windows Start Menu.
3.10.2 Connect Reection to the NVR/hDVR
1. Start Reection by double clicking the desktop icon or using the Windows Start menu.