Setup guide
20
www.sc-black.com
SECTION 3: EQUIPMENT TESTING AND SYSTEM SETUP
9. With the Name of the camera showing in the IP Camera Settings eld, click the Assign button.
NOTE
Video from the camera will not appear until the Cameras tab is Closed and the server is
restarted. Add other IP devices to the system as needed before restarting.
10. Repeat steps 2 through 9 above to add other IP cameras (devices) to the NVR/hDVR.
11. In the Camera tab, click Close.
12. When prompted by the server to restart, click Yes. After the server restarts, you can see video from
the cameras you added.
NOTE
When the Camera tab is reopened, video from the cameras assigned to the system can be
viewed in the Current Recording View window and the Motion Detection Area window by
clicking on the camera icon assigned to the camera.