Setup guide
19H.264 Network IP Camera User Manual
SECTION 3: EQUIPMENT TESTING AND SYSTEM SETUP
7. In the IP Details window, do the following:
a. In the Name eld, change the entry to a descriptive name for the camera. In the example
above, the Name eld contains the default name for SC Black cameras, Black H264.
b. In the User Name and Password elds, enter the user name and password of a user with
administrative access to that device.
c. In the Channel No. eld, select 1 from the pull-down list for stand-alone IP cameras. If the
device you are adding is an IP converter (encoder) with multiple channels for analog cameras,
select the converter channel number of the analog camera you want to see. For example, if
the analog camera is attached to converter channel #3, select 3 from the pull-down list.
d. If the device you are adding supports Stream on Motion, PTZ, IP Audio, or Analog Audio,
click the appropriate checkbox to select it.
e. Click Finish.
8. In the Cong (Preferences) Camera tab, click the IP Camera Settings dropdown list and select
the Name of the camera you congured in the IP Device Details window.