Setup guide
14
www.sc-black.com
SECTION 3: EQUIPMENT TESTING AND SYSTEM SETUP
1. If setting up an hDVR, attach your analog cameras to the ports in the expansion slots on the back
of the server. Also, attach the camera audio cables, if necessary.
2. Power on the NVR/hDVR.
3. Power on the monitor and wait until the NVR/hDVR is initialized. When fully initialized, the server
will display the following SCBlack Digital Surveillance Monitoring System multi-image screen.
Typical SC Black server multi-image display
3.9.3 Log in
1. Click LOG IN (bottom right of screen).
2. Enter a User name and Password in the pop-up Input Password window, and then click OK.
The Administrator default User name and Password are admin and admin. When the login is
successful, the LOG IN button label changes to TOOLS.