Setup guide

12
www.sc-black.com
SECTION 3: EQUIPMENT TESTING AND SYSTEM SETUP
Base
Support
Bracket
Screw
2. Attach the VGA cable provided with the monitor to the VGA input connector on the lower back side
of the monitor.
Inputs on the lower back side of monitor
3. Attach the other end of the VGA cable to the VGA connector on the back of the NVR/hDVR.
4. Attach an audio cable with RCA mini jacks to the PC Audio connector on the lower back side of the
monitor.
5. Attach the other end of the audio cable to the audio line-out connector on the back of the NVR/
hDVR. The audio line out connector is color coded in light green.
6. Attach the power cable to the monitor and plug it into a grounded power outlet.
7. Press the Power button to power on the monitor. The Power button is located in the control panel
on the right side of the monitor.