Setup guide

9NVR and hDVR Systems Setup Guide
SECTION 3: EQUIPMENT TESTING AND SYSTEM SETUP
a. Select the Static option if it is not selected. This option is required to record camera video by
a network NVR or hDVR.
b. Enter the new IP address, subnet mask, and gateway address into the appropriate elds.
c. Click SETUP. A Login window will open.
IP Setup window
d. In the Login window, enter the ID and PW (password) for your camera and click Login. The
default administrator values for the ID and PW are root and pass. After entering the ID and
PW, the IP Setup window will close.
6. In the IPAdmin Tool window, click Refresh and verify that the entry representing the camera now
shows the new IP address.
3.6 Connect to the camera with IE
To further test the connectability of the camera (network settings) and verify video streaming:
1. Open Microsoft Internet Explorer (IE).