Setup guide
8
www.sc-black.com
SECTION 3: EQUIPMENT TESTING AND SYSTEM SETUP
3.5 Congure the camera IP address
1. Open the Windows directory where you installed IPAdmin Tool. Double click IPAdminTool.exe to
start the application. When the IPAdmin Tool starts, it will discover all of the support IP cameras
and encoders that exist on the network. The discovery process may take several minutes.
IPAdmin Tool discovered 192.168.0.100
NOTE
When a camera is powered on, it will not respond to network commands until it is fully
initialized. The initialization process can take up to 2 minutes.
3. In the Product list, nd the entry with the same MAC address as the camera you are conguring. If
the camera is not shown, click Refresh repeatedly to update the list.
4. Right click on the entry for your camera and select IP Address.
5. In the IP Setup window: