Service manual

SKYJACK, Page 11SJIII Series
Section 2 - Maintenance Tables and Diagrams Service and Maintenance
Table 2.2c Floor Loading Pressure (AS)
kg lb. kg lb.
KPa
(kN/m
2
)
psi
KPa
(kN/m
2
)
psf
min* 1089 2400 435 960 689.48 100 7.66 160
max* 1361 3000 544 1200 758.42 110 9.58 200
min* 1170 2580 468 1032 689.48 100 8.14 170
max* 1420 3130 568 1252 758.42 110 10.05 210
min* 1583 3490 633 1396 758.42 110 8.38 175
max* 2195 4840 878 1936 896.32 130 11.73 245
min* 1860 4100 746 1644 827.37 120 10.05 210
max* 2091 4610 836 1844 896.32 130 11.25 235
min* 1864 4110 664 1464 1316.90 191 6.99 146
max* 2549 5620 864 1904 1537.53 223 9.53 199
min* 2173 4790 884 1948 1454.79 211 8.19 171
max* 2422 5340 1038 2288 1620.27 235 9.15 191
min* 2299 5068 958 2112 1434.11 208 8.60 180
max* 2616 5768 1085 2392 1516.85 220 9.77 204
min* 2368 5220 947 2088 537.79 78 5.38 112
max* 2912 6420 1165 2568 579.16 84 6.55 137
min* 2663 5870 1065 2348 565.37 82 6.00 125
max* 3207 7070 1283 2829 648.11 94 7.24 151
60354AD-AS
*
**
NOTE:
6826
6832
MODEL
Total Aerial
Platform Weight
Total Aerial Platform Load
OUP**
3219
4620
4626
4632
OUP - Overall Uniform Pressure is a measure of the average load the aerial platform imparts on
the whole surface directly underneath it. The structure of the operating surface (beams, etc.) must
be able to withstand more than the indicated values above.
The LCP or OUP that an individual surface can withstand varies from structure to structure and is
generally determined by the engineer or architect for that particular structure.
min - Total aerial platform weight with no options
max - Aerial platform weight + all options + full capacity
LCP - Locally Concentrated Pressure is a measure of how hard the aerial platform presses on
the areas in direct contact with the floor. The floor covering (tile, carpet, etc.) must be able to
withstand more that the indicated values above.
3220
3226
LCP**Wheel
3215