Service manual

SKYJACK, Page 9SJIII Series
Section 2 - Maintenance Tables and Diagrams Service and Maintenance
Table 2.2a Floor Loading Pressure (ANSI/CSA)
lb. kg lb. kg psi
KPa
(kN/m
2
)
psf
KPa
(kN/m
2
)
min* 2400 1089 960 435 100 689.48 160 7.66
max* 3000 1361 1200 544 110 758.42 200 9.58
min* 2580 1170 1032 468 100 689.48 170 8.14
max* 3130 1420 1252 568 110 758.42 210 10.05
min* 3400 1542 1396 633 110 758.42 175 8.38
max* 4299 1950 1936 878 130 896.32 245 11.73
min* 4100 1860 1644 746 120 827.37 210 10.05
max* 4610 2091 1844 836 130 896.32 235 11.25
min* 4110 1864 1464 664 191 1316.90 146 6.99
max* 5620 2549 1904 864 223 1537.53 199 9.53
min* 4790 2173 1948 884 211 1454.79 171 8.19
max* 5340 2422 2288 1038 235 1620.27 191 9.15
min* 5068 2299 2112 958 208 1434.11 180 8.62
max* 5768 2616 2392 1085 220 1516.85 204 9.77
min* 5220 2368 2088 947 78 537.79 112 5.36
max* 6420 2912 2568 1165 84 579.16 137 6.56
min* 5870 2663 2348 1065 82 565.37 125 5.99
max* 7070 3207 2829 1283 94 648.11 151 7.23
60354AD-ANSI
*
**
NOTE:
3226
6826
6832
MODEL
Total Aerial
Platform Weight
Total Aerial Platform Load
OUP**
3219
4620
4626
4632
OUP - Overall Uniform Pressure is a measure of the average load the aerial platform imparts on
the whole surface directly underneath it. The structure of the operating surface (beams, etc.) must
be able to withstand more than the indicated values above.
The LCP or OUP that an individual surface can withstand varies from structure to structure and is
generally determined by the engineer or architect for that particular structure.
min - Total aerial platform weight with no options
max - Aerial platform weight + all options + full capacity
LCP - Locally Concentrated Pressure is a measure of how hard the aerial platform presses on
the areas in direct contact with the floor. The floor covering (tile, carpet, etc.) must be able to
withstand more that the indicated values above.
LCP**Wheel
3215
3220