User manual

28
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
2. In the Bi-directional Audio Settings menu, click the checkboxes to select “Listen to the audio from server with setting below”
and “Talk to the speakers of server”.
3. Click Apply, and then click VIEW to return to the camera view screen.
4. On the VIEW screen, check the SPK and MIC options to enable the speaker at the encoder and the microphone on your
computer.
5. At your computer, listen for sounds from the microphone at the encoder. If necessary, adjust the volume from the encoder.
Click: SETUP > Video & Audio > Audio
to re-open the Bi-directional Audio Settings menu. In the Listen frame, adjust the volume to an appropriate level. Click
Apply.
6. Use a microphone at your PC to send audio to the encoder speakers. Verify that your microphone audio is heard at the
speaker.