User manual
21H.264 Network Video Encoder
SECTION 2: INSTALLATION AND SETUP
Typical initial camera view through the encoder
NOTE
If, after logging into your encoder, you cannot see live video and the message:
“Can not Create XMLDOMDocument Install MSXML4.0” appears, download and install the MS XML 4.0 library. This
library can be found at:
http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B-B4F2-46DA-B4B6-
C5D7485F2B42&displaylang=en
5. In the camera window, click the SETUP link in the upper right corner of the window. Enter the User name and Password for
the encoder, and click OK. The default administrator values are root and pass. The Basic Conguration window will open.