User manual

114-Channel H.264 Network Video Encoder
SECTION 2: INSTALLATION AND SETUP
LAN DC12V Power
LAN and power connections
CAUTION

Overvoltage and overcurrent will cause severe damage to the encoder.
2.5 Install IPAdmin Tool
The IPAdmin Tool, included on the CD mini disk, is a utility that will discover cameras and encoders installed on your network and
enable you to perform the initial network setup for each. After a encoder is setup on the network, the Microsoft Internet Explorer
®
web browser can be used to see video from the encoder, set the encoder’s password, date and time, nalize encoder hardware
adjustments, and congure the encoder for functional requirements.
The IPAdminTool can be loaded on a Microsoft Windows XP, Vista or Windows 7 operating system (32- or 64-bit). To use this utility
for the initial setup of your encoder, your computer must be connected to the same network subnet as your encoder.
At a computer on the same LAN (subnet) where your encoders will be installed, do the following:
1. Insert the CD mini disk provided with your camera into your computer’s CD ROM drive and open the CD in a Windows
Explorer window.
2. Find the IPAdminTool directory on the CD.
3. Copy the IPAdminTool directory with its contents to your computer hard drive.