Specifications

83IP Camera and Encoder Software Manual
SECTION 4: SAFETY MODE
SECTION 4
Safety Mode
4.1 Safety Mode
Your encoder or IP camera could encounter an unexpected condition such as a faulty rmware le or uncompleted rmware load
during system boot up. To restore the device to a minimal level of operation, emergency rmware is loaded and the device restarts
in Safety Mode.
4.2 Causes of Safety Mode
The two most common reasons why a device boots in Safety Mode are:
• The power supply is unplugged during system boot up.
• Firmware les required for system boot up are damaged.
The device does not return to the Safety Mode booting until normal booting is attempted 5 times.
4.3 Recovering from Safety Mode?
When the following screen appears, the system rebooted in Safety Mode. Follow the steps shown on the screen.
1. Click the Reboot button on the webpage.