Specifications

Page 11
Remote Control
No. Name
Description
1 ID
When a remote control ID number is set in the DVR, input the DVR ID number.
2 REC
To start and stop manual recording
3 Number
To select channel (1, 2, .. 16) or to enter DVR ID number.
4 F/REW
During playback - To move the playback position 60 seconds backward.
During pause - To move the playback position 1 frame backward.
5 F/ADV
During playback - To move the playback position 60 seconds forward.
During pause - To move the playback position 1 frame forward.
6 REW
To rewind the recording. Press again to increase the rewind speed.
7 PLAY/PAUSE
To play or to pause the footage in playback mode.
8 FF
To fast forward the recording. Press again to increase the fast forward speed.
9 Control button
Press to move the menu items or select channel.
10 SETUP
To open the SETUP menu.
11 SEARCH
To open the search menu.
12 ESC
During setting - To return to previous menu screen. During playback - To exit from playback System Lock – To lock a system when
pressing ESC button for 5 seconds. System Unlock – To unlock a system when pressing ESC button for 5 seconds.
13 BACKUP
To start operations of backup in live or playback mode. (The same function button as CAPTURE on the front panel of DVR)
14 SEQ
To start auto sequencing of the screen in full screen mode. (Toggle)
System Installation and Setup
Follow the steps below to install and setup your system. For more information, refer to the user manual provided
on the CD.
1. Plan your entire installation carefully, considering:
• Position of the cameras to effectively cover your surveillance targets. Avoid locations and orientations
where bright light might shine on or reflect onto the camera lens.
• Security of the camera and the cabling to the DVR. Is it easy for an intruder to disable the cameras?
• Location of the DVR. Is it in a secure location? Is the temperature and humidity within specifications?
2. Install your cameras in accordance with the manufacturer’s instructions.
3. Connect the video/audio and power extension cables to the cameras, then route them to the location of the
DVR. Note that video extension cables connectors are usually different at each end; the end with the male
power connector attaches to the camera drop cable, the end with the female power connector attaches to
the power source and DVR.
4. Place the DVR on a clean, flat surface. Do not apply power to the DVR at this time.
• Plug the USB mouse to the USB port on the DVR.
• Connect a monitor to the VGA connector on the back of the DVR.
5. Connect the video extension cable from each camera to a video port on the back of your DVR.