H.264 4/8/10/16-Channel High-Definition DVR Quick Start Guide Products: BLK-HD4D, BLK-HD4E, BLK-HD8D, BLK-HD10D, BLK-HD16D BLK-HD4E (upper) BLK-HD4D and BLK-HD8D (middle) BLK-HD10D and BLK-HD16D (lower) PLEASE READ THIS GUIDE BEFORE USING YOUR RECORDER, and always follow the instructions for safety and proper use. Save this guide for future reference. BLK-HDxxD_RQ 10/22/14 © 2014 Observint Technologies, Inc.
Specifications* ITEM BLK-HD4D BLK-HD4E BLK-HD8D 720p x 48 fps / 1080p * 20 fps Recording performance Channels 4 channel Video Output Analog: D1 realtime HD: 720p x 60 fps / 1080p x 30 fps 720p x 192 fps / 1080p x 80 fps 8 channel 10 channels 16 channel 8 channels composite, 1.
ITEM BLK-HD4D BLK-HD4E BLK-HD8D USB Port Backup User I/F USB Flash drive Video and still image USB external HDD Video and still image Network Video and still image Menu Display GUI Input Method Front panel buttons, remote control, mouse, keyboard -- PTZ control 1 RS-485 1 RS-485 1 RS-485 2 RS-485 2 RS-485 Termination 1 1 1 2 2 Dynamic DNS Yes (free DDNS) Network Interface 10/100/1000BASE-T Ethernet (RJ-45) Network Network Streaming 640 x 360 x 120 fps 320 x 180 x 120 fps W
Product Components The package contains the DVR unit and the components shown below. BLK-HD4D, BLK-HD8D DVR Unit BLK-HD4E BLK-HD10D, BLK-HD16D Client Software CD Remote Control Battery1.
Front panel indicators and controls BLK-HD4D, BLK-HD8D BLK-HD4E Front Panel LEDs No. Name Description A CH1~4, 8 Indicates that the channel is being recorded. B HDD Indicates that the system is accessing the hard disk. C ALARM Indicates that sensor(s) is/are triggered or motion is detected. D NETWORK Indicates that a network client is connected E BACKUP Indicates that a USB or DVD-RW device contains stored data F POWER Indicating that the system is switched on. Front Panel Buttons No.
No. Name Description 7 Jump/step forward. In playback mode, the playback position moves 60 seconds forward. 8 Press to start or stop manual recording. 9 In live display mode, press to open the SEARCH menu. 10 In playback mode, press to play/pause the footage. 11 Press to open the SETUP menu. 12 Enable/disable the automatic sequence of display of channels in full screen, quad, 9-split display mode. 13 Press to control Pan/Tilt/Zoom operations.
BLK-HD4E back panel connectors Back panel connectors No. Name 1 Fan Airflow outlet 2 HDCCTV / 1.0 INPUTS HD-SDI video inputs AUDIO IN / AUDIO OUT 4 RCA connectors for audio input 1 RCA connector for audio output 4 HDMI HDMI video out. 5 RS-232 interface Used for testing only. 6 VGA Connector for a VGA monitor. 7 eSATA port Connector for external storage 8 ETHERNET RJ-45 connector for LAN connection.
No. Name Description 4 VGA Connector for a VGA monitor 5 HDMI HDMI video out 6 USB Use with a USB flash drive to archive still images and videos, and upgrade firmware, or use to connect a USB mouse to the DVR. 7 Sensor / alarm terminations See description below.
Name Description 6 BACKUP Press to capture video in jpeg format during display during live or playback mode. 7 REW Press to rewind in playback mode. 8 F/REV Jump/step backwards. In playback mode, the jump moves 60 seconds back. 9 F/ADV Jump/step forwards. In playback mode, the jump moves 60 seconds forward. 10 FF Press to fast forward in playback mode. 11 REC Press to start or stop manual recording. 12 SEARCH PLAY/PAUSE During LIVE display mode, press to open the SEARCH menu.
No. Name Description 10 USB Use with a mouse or for backup 11 RS-232 Not used at this time 12 ALARM OUT 2 terminations for alarm device connection. Provides simple on/off switching with a relay (0.5 A / 125 Vac, 1 A / 30 Vac) 13 ETHERNET RJ-45 connector for LAN connection 14 eSATA port 2 eSATA ports for archive of still images or video to an external HDD.
Remote Control No. Name Description 1 ID When a remote control ID number is set in the DVR, input the DVR ID number. 2 REC To start and stop manual recording 3 Number To select channel (1, 2, .. 16) or to enter DVR ID number. 4 F/REW During playback - To move the playback position 60 seconds backward. During pause - To move the playback position 1 frame backward. 5 F/ADV During playback - To move the playback position 60 seconds forward.
• If the camera location has a microphone, also attach the audio cable to an audio input connector on the back of the DVR. 6. Attach the power extension cable to the cameras to the recommended power source to power them on. 7. Power on the DVR. • Connect the power adapter to the DC12V power connector on the back of the DVR. • Power on the monitor. • Connect the power cable to the power adapter and to a standard 120 VAC outlet. When the DVR is powering on, an initialization window will appear. 8.
If a LOGIN window opens, click the virtual keyboard button (at the right of the password entry field) to open the keyboard window. Use the keyboard to click in the default ADMIN password, “1111”, then click OK. In the LOGIN window, click OK again to open the DVR SETUP menus. 12. Configure the SETUP menus to customize the DVR settings for your system. Refer to the user manual included on the CD for more information about DVR Setup and system configuration settings.
Network Connections LAN Connection – Using a crossover cable without a switching hub Connect to the system directly using a crossover type network cable. LAN Connection – Using a switching hub Connect to the system using a hub (switching hub) and an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN cable). Internet (ADSL) Connection Connect to the system using a router or ADSL modem and an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN cable).
