User manual

79H.264 DVR User Manual
SECTION 10: WEBVIEWER
In the Internet Options window, click Apply, then click OK to close the window.
NOTE
If your computer operating system is Windows Vista or Windows 7, User Account Control can interfere with the normal
operation of the DVR user interface. To disable UAC, open the Control Panel > User Account > User Account window, clear the
Use User Account Control (UAC) to help protect your computer check box, then click OK.
A computer restart may be required.
4. In the IE URL eld, enter the IP address assigned to your DVR. Using the example shown above, enter:
192.168.5.3
5. If a message appears to load the Nadatel-WebViewer, click Install. Follow the prompts to Install the program.
After the WebViewer loads, the Connect screen will be available.