User manual
13H.264 DVR User Manual
SECTION 3: SYSTEM SETUP
13
Menu Item Description
POST EVENT RECORD Set the post event recording time duration for the specied channel. (10 ~ 30 seconds)
SENSOR RECORDING
Enable setting up to 4 sensors for the specied channel using the p, q, t, or u buttons.
AUDIO Enable/disable audio recording for the specied channel. Available only on channel 1 through channel 4.
SCHEDULE Set the recording schedule. Press SEL to open the SCHEDULE window. .
3.3.1 Recording Schedules
To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate through the items using the p, q, t, and u
buttons.
[CHANNEL]: Select the specic channel.
[SETUP]: Use
p and q buttons to highlight a record type (None, Continuous, Motion, Sensor), then press SEL to select it. Use the
p, q, t, and u buttons to highlight a timeslot in the schedule, then press SEL to apply the record type to that timeslot. Repeat
this to apply other record types to other time slots. Select the ALL option to apply the schedule to all cameras channels. You can
select or deselect any option by clicking it with a mouse, and you can select a block of timeslots by clicking and dragging the mouse
across them. Timeslots are color coded for the record type applied to them: CONTINUOUS - green, MOTION - yellow, and SENSOR -
red, None - white.
[COPY Schedule]: To copy the schedule setup on channel 1 to channel 2, select the channel 1 schedule, select COPY using the
p, q,
t,
and u buttons, select CH2 using the p, q, t, and u buttons, then press the SEL button.
To return to SETUP menu screen, press the ESC button.