User manual

5H.264 DVR User Manual
No. Name Description
7 ETHERNET RJ-45 connector for LAN connection.
8 SENSOR IN 4 connectors for sensor device connection.
9 ALARM OUT Connector for alarm reporting device. Provides simple On/O switching by using a relay. 0.5A/125V, 1A/30V
10 RS-485 RS-485 control terminal
11 POWER SOCKET Connect DC12V 5A adaptor
12 USB
Use with a USB ash drive to archive still images and videos, and upgrade rmware, or use to connect a USB mouse to the
DVR.
13 SATA Connector for external SATA device
14 COOLING FAN
2.3 Remote Control
Typical Remote Control
NOTE
The remote control provided with your DVR may appear dierent from the one shown above. However, the buttons function as
described in the table below.
Table 4. Remote Control Button Functions
No. Name Function
1 ID When a remote control ID number is setup in DVR, press this button before the number.
2 REC To start and stop manual recording.
3 0 .. 9 To select channel (1, 2, 3, ..) or to enter a DVR ID number.
4 F/REW
During Playback – To move the playback position 60 seconds back.
During Pause – To move the playback position 1 frame back.
5 F/ADV
During Playback – To move the playback position 60 seconds forward.
During Pause – To move the playback position moves 1 frame forward.
SECTION 2: HARDWARE OVERVIEW