User guide

15BlackHawk for MAC Software User Guide
SECTION 3: REMOTE CONFIGURATION SETUP
• NTP: Set to synchronize the time using an NTP server.
— PRIMARY SNMP SERVER: Input the primary NTP server address.
— SECONDARY SNMP SERVER: Input the secondary NTP server address.
— TIME ZONE: Select the time zone.
— CONNECTION MODE: Select the connection mode to NTP time server.
• SEND E-MAIL: Enable/disable e-mail feature.
— TRANSMISSION MODE: Select the mail transmission mode (TEXT or VIDEO).
— IP NOTIFICATION: Enable/disable sending e-mail when the IP address is changed.
— EVENT ALARM: Enable/disable sending e-mail reports when an alarm event is triggered.
— MAIL BY S.M.A.R.T.: Enable/disable sending e-mail reports when S.M.A.R.T. is triggered
— MAIL BY STATUS: Enable/disable sending periodical e-mail of the system status.
— MAIL PORT: Mail port setting.
— SECURE OPTION: Select the secure mail server connection. (SSL or TLS)
— MAIL TO: Input the appropriate email address to enable sending e-mail reports
— MAIL SERVER: Input the SMTP server name, the user ID and password.
— MAIL FROM: Set the source e-mail address.
3.5.6 Network
• PORT: When connecting multiple DVRs to the network, set a unique port number.
• NETWORK AUDIO PORT: Display the network audio port (NETWORK PORT + 1).
• WEB PORT: Set a web server port number.
• NETWORK TYPE
— STATIC: The address setting mode is manual. Input IP, Gateway, Subnet Mask, and DNS IP.