User guide

11BlackHawk for MAC Software User Guide
SECTION 3: REMOTE CONFIGURATION SETUP
SECTION 3
Remote Conguration Setup
The DVR system SETUP conguration can be controlled through BlackHawk for MAC. You must be logged into the DVR with
Administrator privileges to use this feature. To access the DVR SETUP menus, click the REMOTE SETUP button, enter the password
of your administrator login, then click the LOGIN button.
DVR SETUP menus shown through REMOTE SETUP are nearly identical to those viewed at the DVR. Dierences exist depending on
the DVR model you connect to. SETUP screens shown below were captured from BlackHawk for MAC connected to an BLK-DH2 HD
DVR.
• To move to another screen, click the respective tab.
• To close REMOTE SETUP, click the RED window control button.
NOTE
REMOTE SETUP is prohibited if the DVR local SETUP menu is open.
3.5.1 DISPLAY setup
• OSD: Enables the display of date - time and channel number on each video channel display.
• OSD CONTRAST: Adjust the character contrast on the screen.