User guide

9BlackHawk for MAC Software User Guide
SECTION 2: SEARCH AND PLAYBACK VIDEO
Button Description
Info frame
Enter the required information in each eld, then click Connect to access DVR.
Date & Time The Date & Time frame indicates:
• Year and month (at the top). In the example to the left, the year is 2012, then month is the 9th month (September)
• The days when recordings were made (highlighted in gray), and the date selected (blue number).
• The hour, minute, and second to search for. You can select a specic time, or click the search icon (magnier) to
begin playing recorded video on the date selected.
Play Controls
The Play Controls icon buttons are used to play and/or position the video clip selected through the Date & Time frame.
The icons are similar to those used in most computer desktop media players.
CHANNEL SPLIT
Click one of these buttons to select the number of channels displayed in the window (1 channel, 4 channel, 9 channels,
etc.)..
SITE ENTRY
Click the icon and the window to register the number of site will be displayed. When the network connection is done,
SITE ENTRY button is converted to REMOTE SETUP Button.
REMOTE SETUP
Remote Setup Button. This button is converted from SITE ENTRY button when the network connection is done.
Window Control
Red – Close the window
Yellow – Minimize the window
Green – Toggles between normal size and full screen width
Following is a 1-channel view captured from recorded video.