Instructions / Assembly

Page 7Rev. 031020
1-888-651-3431
Step 2: Install the legs (C) onto the center beam
(A) using the M10x130 bolts (G), washers (J), and
nuts (K). Tighten securely with 17mm wrenches.
Step 3: Install the angle foot (D) onto the legs
(C) using the M10x25 bolts (2), washers (J), and
nuts (K). The foot may be set to the adjustment
that best suits your needs. Tighten securely with
17mm wrenches.
Step 4: Install the wheels (F) using the wheel rods (E) and cotter pins (L) as described in Step 6 of
main kit instructions above.
(2)
(3)
(4)