Instructions / Assembly
Page 4Rev. 031020
1-888-651-3431
Step 4: Attach the other angle foot (D)
to the bottom of the winch post (C) using
two M10x25 bolts (O), washers (Q), and
nuts (R). Tighten securely with 17mm
wrenches.
Step 5: Attach the winch handle (L-2) to the winch
(L-1) by unscrewing the nut on the side of the winch,
îš¿tting the handle in place, then securely reattach-
ing the nut with a 19mm wrench. Attach the winch
assembly to the winch post using two M10x25 bolts
(O), washers (Q), and nuts (R). Tighten securely with
17mm wrenches. Fit the end cap plug (K) into the end
of the top of the winch post, using a rubber mallet to
hammer it into place.
(4a)
(4b)
(5)